weldingmachine

Other Entries

In most cases

In most cases, the cracks are near the joint of the floor and the wall. Before you start using the waterproofing mix, make sure you prepare the basement wall. To waterproof your basement, you must cover these cracks in the first place.   Follow the above mentioned steps and you will be able to complete basement waterproofing all on your own.  There are several epoxy or latex waterproof mixes available in the market.   Waterproofing the wall after repairs Once you are done with repairing the holes and cracks, it is time to waterproof your walls.   Create an exit for water Even if you have repaired the fissures and cracks in the walls, the water would still be entering your walls from the same external source. The dovetail groove will retain the waterproof mix better. You will need a waterproofing mix for this purpose. 

If the crack is not major, application of a double coating of waterproof mix will serve the purpose. Remove any kind of chipped or peeled paint. Now fill in this joint with the help of a mortar mix. All you need to do is add water to them and they are ready for use. You need to check this to find a complete solution to the problem. While in some cases, a weep pipe may be required on a temporary basis, it would be needed on a more permanent basis in other cases. If the cracks are thin cracks, then you could use a simple waterproofing mix to cover them up.

Tired of dealing with a leaky basement? If yes, then it is time that you waterproof your basement. You need to know if the leak or seepage is Hydraulic welding machines due to poor construction or water pressure from outside. Here is how you can go about the same. You could use a garden hose for this purpose. Dovetail joints are best to cure heavy water seepage. For effective basement waterproofing, use of a weep pipe is a must. It is also important to ascertain the real cause of the problem. Also, ensure that you moisten the wall before you apply the waterproofing mix. 

Mix one part cement with two parts of sand to create a stiff mortar mix. However, if the cracks are larger you may consider using your own mortar mix. Using a weep pipe can help the trapped water outside to escape. Knowing the root cause of the problem will help you prevent further water entry.  Repair the cracks and holes If you are living in a leaky basement, chances are that there must be some cracks or holes in your basement.  Pack any leaking floor joints Now that you have waterproofed your walls, it is time to check for any leaks in the flooring.  Detect leaks and seepage The first and foremost thing that you need to in the process of waterproofing is to detect all possible leaks and seepages

on November 06 at 08:14 PM

Comments (0)

No login